Lab Facility/ Index:

S M Engineers offers unique facility of repairing your old/non functioning instruments like Vernier Caliper, Micrometer, Dials, Torque wrenches & Height Gauge etc. some of the standard problems are as follows:

  • Vernier / Dial Caliper :ID / OD jaws error, Depth Rod Setting, Repeatability & Fitment of missing spares
  • Micrometer :Parallisum error between two faces, spindle jam, zero error of anvils and fitments of missing spares
  • Dial Indicator: Repeatability, Linear error and fitment of missing spares.

Length Measuring Machine (LMM) :


Our unique Length Measuring Machine (LMM) is competent to calibrate various types of thread plug gauge & thread ring gauges.
(M3 to M 300).
Length Measuring Machine

Dial Calibration Tester :


Dial Calibration Tester equipped with Sylvac Probing System make the set-up ideal for calibration of all types dials
(Up-to 0-50 mm / L.C. : 0.0001mm)
Dial Calibration Tester

Profile Projector (NIKON) :


Our pride NIKON make profile projector is having unique facility to Measure with resolution 0.001mm & Magnification up-to 100X. This equipment is more reliable for Convex, Concave and Measurements like Radius Gauge, Thread Pitch etc.
Nikon

LMM of Trimos Switzerland :


Our LMM of Trimos Switzerland Make, having capacity of 1000 mm & 0.0001mm. We are the leaders in linear measurement for various types of Instrument like Vernier, Micrometer, Plug, Snap & Ring Gauges.
LMM of Trimos Switzerland

Length Measuring Machine Capacity : 1000 mm / L.C : 0.0001 mm :

Laboratory Set-up with Vertical Height Measuring Machine Capability : 1350 mm. :

-: INDEX :-
S.No.
Type Of Instruments / Gauges
01
ANGLE PROTRACTOR
02
ANGLE PLATE / STREIGT EDGE
03
BORE GAUGE
04
BEVEL PROTECTOR
05
COMBINATION SET
06
COATING THICKNESS GAUGE
07
COMPARATOR STAND
08
CALIPER CHECKER
09
DEPTH MICROMETER
10
DEPTH GAUGE (Vernier / Dial Type)
11
DIAL SNAP GAUGE
12
DIAL THICKNESS GAUGE
13
DIAL CALIBRATION TESTER
14
EXTERNAL MICROMETER /Out-Side Micrometer (Fixed type)
15
EXTERNAL MICROMETER /Out-Side Micrometer (Anvil type)
16
EXTERNAL MICROMETER (Digital / Digimatic Type)
17
EXTERNAL MICROMETER (Point / Ball / Spline / Flang type )
18
ENGINEERING SQUARE / Right Angle
19
FORD CUP
20
FILLER GAUGE / WIRE - GAP GAUGE
21
FLOTING CARRIAGE MICROMETER
22
GLASS SCALE
23
HEIGHT GAUGE / Vernier Ht. Gauge (Plain/ Dial / Digimatic Type)
24
HEIGHT MASTER
25
IN SIDE MICROMETER (Fixed / Anvil - Tube Type)
26
LEVER DIAL / Dial Test Indicator
27
MEASURING SCALE / MEASURING TAPE
28
PLUNGER DIAL
29
PISTOL CALIPER
30
PRESSURE GAUGE(At Lab & On Site)
31
PLUG GAUGE
32
PROFILE PROJECTOR (On - Site)
33
RADIUS GAUGE
34
RING GAUGE
35
SHORE - A / SHORE - D
36
SLIP GAUGE SET
37
SPIRIT LEVEL / Level Bottel Indicator
38
STEEL BALL / SPHERICAL METER
39
SNAP GAUGE
40
SURFACE PLATE (On - Site)
41
SINE BAR
42
SURFACE ROUGHNESS TESTER
43
SOUND LEVEL METER / VIBRATION LEVEL METER / LUX METER
44
TACO METER / PUSH - PULL METER
45
THREE POINT MICROMETER / Hole Test
46
TORQUE WRENCH
47
THREAD PITCH GAUGE
48
THREAD PLUG / RING GAUGE
49
TEST SIEVES
50
"V" BLOCK SET
51
VOLUMETRIC FLASK / MEASURING FLASK
52
VERNIER CALIPER / DIAL TYPE /DIGIMATIC TYPE
53
WEIGHING MACHINE / BALANCE